Top of the page
Hawco Marstair Cellar Cooling CXA CXEA
Marstair Cellar Cooling

Competitively Priced & Reliable Cellar Cooling Systems from Marstair

Designed and built for the UK pub trade by Marstair's factory in West Yorkshire, the Cellarator split system offers two affordable and robust ranges, specifically designed for beer cellars between 20 and 206 cubic metres.  
  • The R410A CXEA series is the popular choice for most cellar cooling projects
  • The R407C CXA series is best where longer pipe runs and higher ambient temperatures are required
Marstair evaporators are protected by a distinctive, single-moulded body, impregnated with an anti-bacterial agent to completely prevent the build-up of mould. 

All cellar cooling systems include an electronic controller. 

Looking for Marstair spare parts? View our service replacement stock
Marstair's range of cellar cooling units are easy to install and built to last, with a reassuring 5-year warranty available. 

Weighing between 18 and 25 kilos, Marstair evaporators are easily positioned, with mounting brackets suitable for wall and ceiling mounting. 

R410A systems offer pipe runs up to 25 metres (and R407C systems up to a maximum of 80 metres). All electronics are easily accessible from the front of the unit. 
Marstair Cellar Cooling : Two Flexible Ranges
R410A Cellarator Indoor Units with Electronic Controls

R410A Cellar Cooling System 
with Electronic Controlller

  • 1.79kW to 4.54kW (at 8 °C)
  • 2.28kW to 5.60kW (at 12.7°C)
  • Up to 25 metre pipe run
  • Suitable for cellars up to 88 m3 (below ground at 8°C) and 54m3 (above ground at 8°C
VIEW DATASHEET FOR CXEA 30, CXEA 50 & CXEA 70
View All R410A Systems
R407C Cellarator Indoor Units with Electronic Controls

R407C Cellar Cooling System
with Electronic Controlller 

  • 2.45kW to 7.30kW (at 8 °C)
  • 2.80kW to 8.50kW (at 12.7°C)
  • Up to 50 & 80 metre pipe run
  • Suitable for cellars up to 36 m3 (below ground at 8°C) and 144m3 (above ground at 8°C)
OPEN DATASHEET FOR CXE 30, CXE 40, CXE 50 & CXE 70
View All R407C Systems
Marstair Cellarator Indoor Units

All Cellar Cooling Systems

See all R410A and R407C cellar cooling systems
Commonly Asked Questions
Hover image

What cellar sizes are possible with R410A models?

Hover image

What cellar sizes are possible with R407C models?

Hover image

What is the cooling duty for a R410A system?

Hover image

What is the cooling duty for a R407C system?

More Advantages of Marstair Cellar Cooling
Partially Pre-Charged
R410A models come pre-charged up to 7.5 metre pipe run 
Easy to Install
ABS drain tray incorporating standard 22mm OD fitting drain stub
Precise Temperature Control
Easy to install field fit electric heater kit with factory fit option
Versatile Options
With controlled temperatures down to 4°C (dependent upon system match), Marstair systems can also be used for food preparation and other areas
Marstair Cellar Cooling Unit

Tell Us About Your Project

We can help you calculate the duty you need, taking into consideration the size of the cellar, whether the cellar is above or below ground, the desired cooling temperature and the ambient temperature. 
Marstair Cellar Cooling Beer

Perfect Results Every Time

We can provide additional advice on cellar cooling using A2L refrigerants (R454C). We can also advise on the specification of longer pipe runs and any Marsair product features included.  
Here to support you

Assistance with your system design

Get advice on choosing the right cellar cooling system for your project. Call +44 (0)1483 869 070 or email sales@hawco.co.uk

Got a technical question?

For further technical information about cellar cooling technology, get in touch with our expert team 

Discuss your application

If you have a question about your cellar cooling project, we would be happy to help. Call our experienced team on +44 (0)1483 869070 or email sales@hawco.co.uk
Hawco Marstair Cellar Cooling CXA CXEA
Marstair Cellar Cooling

Competitively Priced & Reliable Cellar Cooling Systems from Marstair

Designed and built for the UK pub trade by Marstair's factory in West Yorkshire, the Cellarator split system offers two affordable and robust ranges, specifically designed for beer cellars between 20 and 206 cubic metres.  
  • The R410A CXEA series is the popular choice for most cellar cooling projects
  • The R407C CXA series is best where longer pipe runs and higher ambient temperatures are required
Marstair evaporators are protected by a distinctive, single-moulded body, impregnated with an anti-bacterial agent to completely prevent the build-up of mould. 

All cellar cooling systems include an electronic controller. 

Looking for Marstair spare parts? View our service replacement stock
Marstair's range of cellar cooling units are easy to install and built to last, with a reassuring 5-year warranty available. 

Weighing between 18 and 25 kilos, Marstair evaporators are easily positioned, with mounting brackets suitable for wall and ceiling mounting. 

R410A systems offer pipe runs up to 25 metres (and R407C systems up to a maximum of 80 metres). All electronics are easily accessible from the front of the unit. 
Marstair Cellar Cooling : Two Flexible Ranges
R410A Cellarator Indoor Units with Electronic Controls

R410A Cellar Cooling System 
with Electronic Controlller

  • 1.79kW to 4.54kW (at 8 °C)
  • 2.28kW to 5.60kW (at 12.7°C)
  • Up to 25 metre pipe run
  • Suitable for cellars up to 88 m3 (below ground at 8°C) and 54m3 (above ground at 8°C
VIEW DATASHEET FOR CXEA 30, CXEA 50 & CXEA 70
View All R410A Systems
R407C Cellarator Indoor Units with Electronic Controls

R407C Cellar Cooling System
with Electronic Controlller 

  • 2.45kW to 7.30kW (at 8 °C)
  • 2.80kW to 8.50kW (at 12.7°C)
  • Up to 50 & 80 metre pipe run
  • Suitable for cellars up to 36 m3 (below ground at 8°C) and 144m3 (above ground at 8°C)
OPEN DATASHEET FOR CXE 30, CXE 40, CXE 50 & CXE 70
View All R407C Systems
Marstair Cellarator Indoor Units

All Cellar Cooling Systems

See all R410A and R407C cellar cooling systems
Commonly Asked Questions
Hover image

What cellar sizes are possible with R410A models?

Hover image

What cellar sizes are possible with R407C models?

Hover image

What is the cooling duty for a R410A system?

Hover image

What is the cooling duty for a R407C system?

More Advantages of Marstair Cellar Cooling
Partially Pre-Charged
R410A models come pre-charged up to 7.5 metre pipe run 
Easy to Install
ABS drain tray incorporating standard 22mm OD fitting drain stub
Precise Temperature Control
Easy to install field fit electric heater kit with factory fit option
Versatile Options
With controlled temperatures down to 4°C (dependent upon system match), Marstair systems can also be used for food preparation and other areas

Tell Us About Your Project

We can help you calculate the duty you need, taking into consideration the size of the cellar, whether the cellar is above or below ground, the desired cooling temperature and the ambient temperature. 
Marstair Cellar Cooling Unit
Marstair Cellar Cooling Beer

Perfect Results Every Time

We can provide additional advice on cellar cooling using A2L refrigerants (R454C). We can also advise on the specification of longer pipe runs and any Marsair product features included.  
Here to support you

Assistance with your system design

Get advice on choosing the right cellar cooling system for your project. Call +44 (0)1483 869 070 or email sales@hawco.co.uk

Got a technical question?

For further technical information about cellar cooling technology, get in touch with our expert team 

Discuss your application

If you have a question about your cellar cooling project, we would be happy to help. Call our experienced team on +44 (0)1483 869070 or email sales@hawco.co.uk