Top of the page
Bespoke NTC & PTC Thermistor Probes

Bespoke DS18B20 Probes

DS18B20 probes offer a versatile and low cost temperature sensor for general purpose use. These can be purpose-built or customised in multiple ways to suit your application.
  • Recommended Temperature Range: -55°C to 125°C 
  • Provides an accuracy of ±0.5°C
  • Compliance with IEC584 & IEC751 standards
  • 3V-6V working Voltage level of sensor
DS18B20 probes are direct-to-digital temperature sensors, easily programmable and ideal for use in medical and scientific roles.  

OPEN DATASHEET
VIEW SAMPLE PROBE

Options available

DS18B20 probes can be customised to your particular application. For example, we can provide 
  • 6x30mm sensor, 300mm cable
  • Can easily be interfaced with any microcontroller
  • Optional waterproofing
Image slider
Advantages of DS18B20 probes
Multiple Sensors, Single Wire
Multiple DS18B20 probes can operate on the same 1 wire bus, thanks to each retaining a unique 64-bit serial code engraved at the factory. This makes it easy to tell them apart from each other.
Parasite Power
Designed to draw energy directly from data cables, the DS18B20 can operate without need for a dedicated external power supply.
Multi-Role Design
The construction of the DS18B20 allows it to be used in many harsh environments, notably in measuring soils, mines, chemical solutions, and inside active machinery.
All-in-One 
The DS18B20 does not require any external external components to operate in hostile environments.

Understanding Every Aspect of Your Project

We can advise on which type of sensor will be most appropriate for your needs, taking technical critera and cost into consideration. 
Hawco Bespoke NTC & PTC Thermistor Probes
Hawco Custom NTC & PTC Thermistor Probes

Custom Designed Probes

We can recommend how to customise your probe to optimise its position, improve operation, avoid any communication errors, prevent sensor failure, protect the probe from damage and extend its lifespan. 
Here to support you

Talk to us about your application

Contact our industrial team for advice about different types of sensors. Call +44 (0)1483 869 070 or email sales@hawco.co.uk.

Need to replicate an existing probe?

We can supply a digital sensor from an existing technical drawing. Email your requirements to sales@hawco.co.uk

Got a bespoke requirement?

We can normally deliver customised probes in 2-3 weeks after your order is placed. To discuss lead times, call +44 (0)1483 869 070
Bespoke NTC & PTC Thermistor Probes

DS18B20 Programmable 1-Wire Digital Temperature Sensor

DS18B20 temperature probes provide 9-bit to 12-bit temperature measurements over a 1-wire interface. Only one digital port pin is required for communication with a central microprocessor. 

Alarm settings can be set to monitor high and low temperature limits of a device.  Probes can be customised or purpose-built to the application required.
  • Recommended temperature range: -55°C to 125°C 
  • Usable with 3V-5.5V systems
  • No local external power required
  • 1-wire protocols suitable for long network lengths
DS18B20 probes are direct-to-digital temperature sensors used for HVAC environmental controls and temperature monitoring systems inside buildings. They are also ideal for process monitoring and control systems and other industrial applications. 

OPEN DATASHEET
VIEW SAMPLE PROBE

Options available

DS18B20 probes can be customised to your particular application. For example, we can provide 
  • 6x30mm sensor, 300mm cable
  • Optional waterproofing
Image slider
Advantages of DS18B20 probes
Multiple Sensors, Single Wire
Multiple DS18B20 probes can operate on the same 1-wire bus, with each sensor retaining a unique 64-bit serial code engraved at the factory. This makes it easy to tell them apart from each other.
Parasite Power
Designed to draw energy directly from data cables, the DS18B20 can operate without need for a dedicated external power supply.
This is useful for applications requiring remote temperature sensing or where space is constrained.
Robust Construction
The DS18B20 can be used in many harsh environments, such as measuring soils, mines, chemical solutions, and inside active machinery.
Multi-Role Design 
The probe is capable of monitoring soil temperature to human body temperature

Understanding Every Aspect of Your Project

We can advise on which type of sensor will be most appropriate for your needs, taking technical critera and cost into consideration. 
Hawco Bespoke NTC & PTC Thermistor Probes
Hawco Custom NTC & PTC Thermistor Probes

Custom Designed Probes

We can recommend how to customise your probe to optimise its position, improve operation, avoid any communication errors, prevent sensor failure, protect the probe from damage and extend its lifespan. 
Here to support you

Talk to us about your application

Contact our industrial team for advice about different types of sensors. Call +44 (0)1483 869 070 or email sales@hawco.co.uk.

Need to replicate an existing probe?

We can supply a digital sensor from an existing technical drawing. Email your requirements to sales@hawco.co.uk

Got a bespoke requirement?

We can normally deliver customised probes in 2-3 weeks after your order is placed. To discuss lead times, call +44 (0)1483 869 070