Pre-Formed Silicone Heater Mats

Customisable Silicone Rubber Industrial Pipe Heaters

Intended for use with small diameter pipes, silicone rubber heaters can be pre-formed to suit a wide variety of pipework and vessels. Custom designed to any shape or size, these heaters can provide constant temperatures up to 250°C.

The silicone heating element will hold its shape without fixings in certain applications. We can also supply separate fixings for more dynamic or sensitive applications. 
  • UL & VDE Approval Available
  • IP64 or IP65 Protection
  • Suitable for pipes with a diameter between 10mm and 200mm
  • Basic thickness from 1.5mm to 2.2mm
  • 0.22 watt/metre/k thermal conductivity




Pre-formed silicone heater mats are frequently used in the chemical and pharmaceutical production processes and food production. Other applications include the composite repair of aircraft, environmental controls, telecommunication systems, and maintaining a set temperature for cold sensitive electronics, such as batteries or satellite dishes. 

OPEN DATASHEET

Custom Designed to Your Specification

Pre-formed pipe heaters can be supplied in virtually any shape or diameter up to 200mm. Thermal limitors can be integrated along with thermistors, RTDs and thermocouples. 

Heaters can be fixed using separate straps or permanently installed using room temperature vulcanising silicone adhesive or self adhesive systems. Insulation foam can also be bonded to the spine of the heater to help reduce heat loss without the risk of damaging the foam at very small diameters.
Advantages of Pre-Formed Silicone Heater Mats
Rugged Design
Each heater mat is resistant any environmental issues which might wear it down - Weather, ageing, fungus, bacteria, acetone, alcohol, and acid, among many noted factors.
Broad Temperature Ranges
The series is able to offer temperature ranges up to 250°C and has a material operational range from -60° to 260°C.


Full Customisation Options
The production options for these mats allows them to fit the full or partial circumference of any pipe from 10mm to 200mm diameter.
Fully Secured Designs
All heaters are supplied straps for attachment to pipes as standard, with options such as insulation foam for a further means of securing them into place.

Designed to Unique Specifications

Any product can be bespoke and custom ordered to whatever role you require, no matter the industry.
Hawco Pre-Formed Heater Mats
Prototype Silicone Rubber Heater Mats

Prototypes and Small Quantities Possible

Short lead times with bespoke designs available, and limited order quantities on offer.



Here to support you

Tell us about your application

No two projects are the same. Contact us to discuss your project scope and what you would like to achieve on +44 (0)1483 869070 or email sales@hawco.co.uk

Got a question?

With so many options available, we are happy to provide any technical information you need to specify the right features for your application. 

Custom requirements

We can propose a design based on an existing part or set of technical drawings. Send your requirements to sales@hawco.co.uk
Pre-Formed Silicone Heater Mats

Customisable Silicone Rubber Industrial Pipe Heaters

Intended for use with small diameter pipes, silicone rubber heaters can be pre-formed to suit a wide variety of pipework and vessels. Custom designed to any shape or size, these heaters can provide constant temperatures up to 250°C.

The silicone heating element will hold its shape without fixings in certain applications. We can also supply separate fixings for more dynamic or sensitive applications. 
  • UL & VDE Approval Available
  • IP64 or IP65 Protection
  • Suitable for pipes with a diameter between 10mm and 200mm
  • Basic thickness from 1.5mm to 2.2mm
  • 0.22 watt/metre/k thermal conductivity




Pre-formed silicone heater mats are frequently used in the chemical and pharmaceutical production processes and food production. Other applications include the composite repair of aircraft, environmental controls, telecommunication systems, and maintaining a set temperature for cold sensitive electronics, such as batteries or satellite dishes. 

OPEN DATASHEET

Custom Designed to Your Specification

Pre-formed pipe heaters can be supplied in virtually any shape or diameter up to 200mm. Thermal limitors can be integrated along with thermistors, RTDs and thermocouples. 

Heaters can be fixed using separate straps or permanently installed using room temperature vulcanising silicone adhesive or self adhesive systems. Insulation foam can also be bonded to the spine of the heater to help reduce heat loss without the risk of damaging the foam at very small diameters.
Advantages of Pre-Formed Silicone Heater Mats
Rugged Design
Each heater mat is resistant any environmental issues which might wear it down - Weather, ageing, fungus, bacteria, acetone, alcohol, and acid, among many noted factors.
Broad Temperature Ranges
The series is able to offer temperature ranges up to 250°C and has a material operational range from -60° to 260°C.


Full Customisation Options
The production options for these mats allows them to fit the full or partial circumference of any pipe from 10mm to 200mm diameter.
Fully Secured Designs
All heaters are supplied straps for attachment to pipes as standard, with options such as insulation foam for a further means of securing them into place.

Designed to Unique Specifications

Any product can be bespoke and custom ordered to whatever role you require, no matter the industry.
Hawco Pre-Formed Heater Mats
Prototype Silicone Rubber Heater Mats

Prototypes and Small Quantities Possible

Short lead times with bespoke designs available, and limited order quantities on offer.



Here to support you

Tell us about your application

No two projects are the same. Contact us to discuss your project scope and what you would like to achieve on +44 (0)1483 869070 or email sales@hawco.co.uk

Got a question?

With so many options available, we are happy to provide any technical information you need to specify the right features for your application. 

Custom requirements

We can propose a design based on an existing part or set of technical drawings. Send your requirements to sales@hawco.co.uk