Top of the page
Gas ignition control from Fenwal Controls

Customisable Controls for Reliable Automatic Gas Ignition 

A pioneer of automatic gas burner technology, US component manufacturer Fenwal Controls produces microprocessor-based gas ignition controls for the precise, repeatable and safe operation of all types of gas-fired equipment. 

Custom designs and configurable software allow for complete and complex ignition sequences and monitoring to be programmed to meet the requirements of each application.
  • Reliable flame sensing with instant response to a loss of flame
  • Global approvals
  • Normally supplied as direct spark ignition (hot surface and intermittent pilot also available)
  • 12VDC, 24VAC and 120VAC input voltages
  • 230VAC available from September 2025
Commonly used in commercial kitchen equipment including deep fat fryers, convection ovens and griddles as well as domestic combi boilers and water heaters. 
Gas ignition controls from Fenwal Controls provide a critical safety component in gas-fired equipment by controlling the gas valve, safely lighting the burner and continuously monitoring the flame. 
230V Gas Ignition Systems
230V Gas Ignition Control

230VAC Direct Spark Ignition Control 

  • Direct spark ignition (DSI)
Available from September 2025
CONTACT US FOR SERIES 35-20 DATASHEET
230V Gas Ignition Control

230VAC Direct Spark Ignition Control with Inducer Blower

  • Direct spark ignition (DSI)
  • Inducer blower relay for forced draft
Available from September 2025
CONTACT US FOR SERIES 35-21 DATASHEET
230V Gas Ignition Control

230VAC Direct Spark Ignition Control with Intermittent Pilot Ignition 

  • Intermittent pilot (IP) or spark-to-pilot
Available from September 2025
CONTACT US FOR SERIES 35-23 DATASHEET
12VDC, 24VAC & 120VAC Gas Ignition Systems

12 VDC/24 VDC Direct Spark Ignition Control

  • Direct spark (DSI) or hot surface (HSI) ignition
  • Available with or without combustion blower relay 
  • Enclosure either board only, or cover & base
OPEN SERIES 35-40 / 35-50 DATASHEET

24 VAC Direct Spark Ignition Control

  • Direct spark (DSI), intermittent pilot (IP) or hot surface (HSI) ignition
  • Available with or without combustion blower relay
  • Enclosure either board only or cover & base
OPEN SERIES 35-60 DATASHEET

120 VAC Direct Spark Ignition Control

  • Ignition types – direct spark (DSI), intermittent pilot (IP) or hot surface (HSI) ignition
  • Availalbe with or without combustion blower relay
  • Enclosure either cover & base, board only or potted module
OPEN SERIES 35-70 DATASHEET
Modulating Combustion & System Control Systems

24 VAC PIM Gas Ignition Control

OPEN SERIES 35-90 DATASHEET
Tools & resources
Advantages of Fenwal Gas Ignition Systems
Essential Safety Component
A vital component of gas-fired equipment, controlling the gas valve, safely lighting the burner, and monitoring the activity of the flame. 
Precision Measurements
Fenwal's microprocessor products allow for pinpoint timings and measurements of flame activity.
Easy Diagnostics
Every Fenwal design is fitted with an easy-to-operate and easy-to-read LED diagnostic system, for rapid system analysis.
Recycle/Re-Ignition Mode
A number of Fenwal's products come with a recycle and re-ignition mode, allowing for repaid restarts following potential failures.

Understanding your application

We work with a diverse range of OEMs in the UK and Europe - so no two projects are the same. Our aim is to provide the best gas ignition control to meet the demands of your product design with customisations that will optimise its performance. 
Gas water heater
Chefs in a commercial kitchen

Reliable supply chain

Our “platform” products provide the benefit of custom design with the price and availability of standard production units, including “quick turn” samples for agency and responsive production ramp-up.
Here to support you

Order in advance

For advice on choosing the right gas ignition control for your design project, contact our technical sales team and ask about our free design-in service. Call +44 (0)1483 869 070 or email industrial@hawco.co.uk with your requirements..

Order now receive tomorrow

If you have a technical question about delivery times, we can help. Email sales@hawco.co.uk or call +44 (0)1483 869070 

Custom requirements? talk to us

Our most popular tools and equipment are available to buy online.
Call +44 (0)1483 869 070 or email industrial@hawco.co.uk
Gas ignition control from Fenwal Controls

Customisable Controls for Reliable Automatic Gas Ignition 

A pioneer of automatic gas burner technology, US component manufacturer Fenwal Controls produces microprocessor-based gas ignition controls for the precise, repeatable and safe operation of all types of gas-fired equipment. 

Custom designs and configurable software allow for complete and complex ignition sequences and monitoring to be programmed to meet the requirements of each application.
  • Reliable flame sensing with instant response to a loss of flame
  • Global approvals
  • Normally supplied as direct spark ignition (hot surface and intermittent pilot also available)
  • 12VDC, 24VAC and 120VAC input voltages
  • 230VAC available from September 2025
Commonly used in commercial kitchen equipment including deep fat fryers, convection ovens and griddles as well as domestic combi boilers and water heaters. 
Gas ignition controls from Fenwal Controls provide a critical safety component in gas-fired equipment by controlling the gas valve, safely lighting the burner and continuously monitoring the flame. 
230V Gas Ignition Systems
230V Gas Ignition Control

230VAC Direct Spark Ignition Control 

  • Direct spark ignition (DSI)
Available from September 2025
CONTACT US FOR SERIES 35-20 DATASHEET
230V Gas Ignition Control

230VAC Direct Spark Ignition Control with Inducer Blower

  • Direct spark ignition (DSI)
  • Inducer blower relay for forced draft
Available from September 2025
CONTACT US FOR SERIES 35-21 DATASHEET
230V Gas Ignition Control

230VAC Direct Spark Ignition Control with Intermittent Pilot Ignition 

  • Intermittent pilot (IP) or spark-to-pilot
Available from September 2025
CONTACT US FOR SERIES 35-23 DATASHEET
12VDC, 24VAC & 120VAC Gas Ignition Systems

12 VDC/24 VDC Direct Spark Ignition Control

  • Direct spark (DSI) or hot surface (HSI) ignition
  • Available with or without combustion blower relay 
  • Enclosure either board only, or cover & base
OPEN SERIES 35-40 / 35-50 DATASHEET

24 VAC Direct Spark Ignition Control

  • Direct spark (DSI), intermittent pilot (IP) or hot surface (HSI) ignition
  • Available with or without combustion blower relay
  • Enclosure either board only or cover & base
OPEN SERIES 35-60 DATASHEET

120 VAC Direct Spark Ignition Control

  • Ignition types – direct spark (DSI), intermittent pilot (IP) or hot surface (HSI) ignition
  • Availalbe with or without combustion blower relay
  • Enclosure either cover & base, board only or potted module
OPEN SERIES 35-70 DATASHEET
Modulating Combustion & System Control Systems

24 VAC PIM Gas Ignition Control

OPEN SERIES 35-90 DATASHEET
Tools & resources
Advantages of Fenwal Gas Ignition Systems
Essential Safety Component
A vital component of gas-fired equipment, controlling the gas valve, safely lighting the burner, and monitoring the activity of the flame. 
Precision Measurements
Fenwal's microprocessor products allow for pinpoint timings and measurements of flame activity.
Easy Diagnostics
Every Fenwal design is fitted with an easy-to-operate and easy-to-read LED diagnostic system, for rapid system analysis.
Recycle/Re-Ignition Mode
A number of Fenwal's products come with a recycle and re-ignition mode, allowing for repaid restarts following potential failures.

Understanding your application

We work with a diverse range of OEMs in the UK and Europe - so no two projects are the same. Our aim is to provide the best gas ignition control to meet the demands of your product design with customisations that will optimise its performance. 
Gas water heater
Chefs in a commercial kitchen

Reliable supply chain

Our “platform” products provide the benefit of custom design with the price and availability of standard production units, including “quick turn” samples for agency and responsive production ramp-up.
Here to support you

Order in advance

For advice on choosing the right gas ignition control for your design project, contact our technical sales team and ask about our free design-in service. Call +44 (0)1483 869 070 or email industrial@hawco.co.uk with your requirements..

Order now receive tomorrow

If you have a technical question about delivery times, we can help. Email sales@hawco.co.uk or call +44 (0)1483 869070 

Custom requirements? talk to us

Our most popular tools and equipment are available to buy online.
Call +44 (0)1483 869 070 or email industrial@hawco.co.uk
Sectors
​​​​​​​​Hawco Air
Hawco Industrial
Hawco Refrigeration
All Standard Stock Items
Need Assistance?
Company
Contact
​​​​Sales: +44 (0) 1483 869 070
Technical: +44 (0) 1483 869 069
Other Enquiries: +44 (0) 1483 869 100

UK Sales
sales@hawco.co.uk

Export Sales
export@hawco.co.uk
Opening Hours
​​​​Monday: 08:40 - 17:00
Tuesday: 08:40 - 17:00
Wednesday: 08:40 - 17:00
Thursday: 08:40 - 17:00
Friday: 08:40 - 16:10
​​​​
Find Us On
Sign up to our newsletter
Need Assistance?
Company
​​​​About Us
Our Team​​​​
Contact
​​​​Sales: +44 (0) 1483 869 070
Technical: +44 (0) 1483 869 069
Other Enquiries: +44 (0) 1483 869 100

UK Sales
sales@hawco.co.uk

Export Sales
export@hawco.co.uk
Opening Hours
​​​​​​​​​​​Monday: 08:40 - 17:00
Tuesday: 08:40 - 17:00
Wednesday: 08:40 - 17:00
Thursday: 08:40 - 17:00
Friday: 08:40 - 16:10
​​​​​
Join Us On
Sign up to our newsletter