LU-VE CUBIC UNIT COOLER 35200W@10KTD

Product Code: F45HC1314-E7
£3,661.13

Available to Order


Specification

FIN SPACING 7MM 3 X 450MM DIA FANS

Image is for display purpose only



fin spacing 7mm 3 x 450mm dia fans dims 655hx2885wx655d electric defrost air throw 36mUnit coolers for cold rooms.

The dimensional and functional characteristics that distinguish the super compact - super efficient cooler range are:

  • Super efficient heat exchanger
  • Reduced dehumidification
  • Reduced frost formation
  • Increased air throw
  • Greatly reduced internal volume
  • Low noise levels
  • Low energy consumption
  • Very compact overall dimensions.

New Turbocoil 3 Heat Exchanger

Our super efficient Turbocoil 3 heat exchanger has a high ratio of capacity/cost, that has been achieved by the following:

Tubes - New small diameter inner grooved helical, high efficiency copper tubes specially developed for the new refrigerants.

Turbofin 3 - New aluminium high efficiency fins with special turbulence, reducing dehumidification and frost formation.

Fin Spacing - To satisfy all refrigeration requirements in High, Medium and Low temperature application and in different humidity conditions three new ranges of unit coolers are available Range 4 = Fin spacing 4,5 mm Range 6 = Fin spacing 6,0 mm Range 7 = Fin spacing 7,5 mm Range 10 = Fin spacing 10,0 mm

Distributor and Refrigerant

Circuit Distributors and refrigerant circuits optimised to ensure maximum efficiency of the heat exchanger in various applications of the unit cooler.

Suction pressure gauge connection

This allows for the checking of suction pressure and correct performance of the unit cooler.

Fan Motor Assembly

All models use a new type of high efficiency low consumption fan motor assembly, incorporating internal thermal protection. The fans have been statically and dynamically balanced. 450 mm diameter motor assembly Voltage 1ph 230V 50Hz Insulation class F Protection IP 54. Electrical box Protection IP 55.

Fan Shroud and Grille

The new fan shroud and air directional grills are designed to obtain a homogeneus airflow along with a long air throw. The grill conforms to the strictest of safety norms.

Electric Defrost

The stainless steel electric heater element permits a quick and efficient defrost of the coil. The heater elements are connected to the unit's electrical box. For special and particularly aggrevated conditions of applications a heavy-duty electric defrost for both the coil and shroud is available.

Electrical box Protection IP 54.

Casing Specially designed Steel galvanised casing with Epoxy-Polyester powder coating corrosion resistant. The new designed casing is carefully constructed and painted to blend with materials normally used in cold rooms.

Maintenance and Cleaning

Access to all internal parts can be achieved with one tool; the grill, side panels and drip tray are easily detached giving access to fan motor assemblies, electric heater elements, and TEV. The units are EUROVENT certified



Please Note: For all Export orders a member of our team will contact you to arrange shipping

Please Note - In some cases the alternatives might be under or over powered or dimensionally different, if you are unsure we recommend calling the office on 01483 869100

Why CO2?: Natural refrigerant

EU F-Gas Regulation is a key priority for European countries. It ensures compliance with the Kigali Amendment supporting international climate commitments on greenhouse gases and leading the global transition to climate-friendly HFC-free technologies.

Carbon dioxide (R–744) is regaining its place in the refrigeration world. Driven by environmental concerns, legislation is requiring increased adoption of ‘alternative’ refrigerants, of which CO2 is one.

CO2 is a very attractive refrigerant from an environmental perspective. Zero ODP and “GWP” (Global Warming Potential)=1 means natural substance in the atmosphere.

In Europe a step-by-step HFC reduction has been in place since the F Gas regulation was introduced in 2015. In fact, not only in Europe but also other countries all over the world have actively been preparing to enact the necessary domestic legislation to implement the agreement for reducing the use of HFCs.

Panasonic is now able to provide a solution in Europe with CO2 refrigeration systems to prevent global warming and to support environment-friendly retail operations.

The following table shows how well R744 (CO2) performs regarding environmental impact and safety.

fin spacing 7mm 3 x 450mm dia fans dims 655hx2885wx655d electric defrost air throw 36mUnit coolers for cold rooms.

The dimensional and functional characteristics that distinguish the super compact - super efficient cooler range are:

  • Super efficient heat exchanger
  • Reduced dehumidification
  • Reduced frost formation
  • Increased air throw
  • Greatly reduced internal volume
  • Low noise levels
  • Low energy consumption
  • Very compact overall dimensions.

New Turbocoil 3 Heat Exchanger

Our super efficient Turbocoil 3 heat exchanger has a high ratio of capacity/cost, that has been achieved by the following:

Tubes - New small diameter inner grooved helical, high efficiency copper tubes specially developed for the new refrigerants.

Turbofin 3 - New aluminium high efficiency fins with special turbulence, reducing dehumidification and frost formation.

Fin Spacing - To satisfy all refrigeration requirements in High, Medium and Low temperature application and in different humidity conditions three new ranges of unit coolers are available Range 4 = Fin spacing 4,5 mm Range 6 = Fin spacing 6,0 mm Range 7 = Fin spacing 7,5 mm Range 10 = Fin spacing 10,0 mm

Distributor and Refrigerant

Circuit Distributors and refrigerant circuits optimised to ensure maximum efficiency of the heat exchanger in various applications of the unit cooler.

Suction pressure gauge connection

This allows for the checking of suction pressure and correct performance of the unit cooler.

Fan Motor Assembly

All models use a new type of high efficiency low consumption fan motor assembly, incorporating internal thermal protection. The fans have been statically and dynamically balanced. 450 mm diameter motor assembly Voltage 1ph 230V 50Hz Insulation class F Protection IP 54. Electrical box Protection IP 55.

Fan Shroud and Grille

The new fan shroud and air directional grills are designed to obtain a homogeneus airflow along with a long air throw. The grill conforms to the strictest of safety norms.

Electric Defrost

The stainless steel electric heater element permits a quick and efficient defrost of the coil. The heater elements are connected to the unit's electrical box. For special and particularly aggrevated conditions of applications a heavy-duty electric defrost for both the coil and shroud is available.

Electrical box Protection IP 54.

Casing Specially designed Steel galvanised casing with Epoxy-Polyester powder coating corrosion resistant. The new designed casing is carefully constructed and painted to blend with materials normally used in cold rooms.

Maintenance and Cleaning

Access to all internal parts can be achieved with one tool; the grill, side panels and drip tray are easily detached giving access to fan motor assemblies, electric heater elements, and TEV. The units are EUROVENT certified



Please Note: For all Export orders a member of our team will contact you to arrange shipping

Delivery & Returns

Delivery Policy

For Quick Pick and website items only, delivery is free of charge for orders over £50.00. For Quick Pick and website orders below £50.00, a £15.00 delivery and administration fee will be charged.

Hawco offers a next day delivery service for orders placed before 4pm Monday - Friday. The delivery service is standard to all central UK. If you require overseas or timed delivery, please call the sales office on Hawco: 01483 869070

Special Carriage Costs

When ordering online and chosing a "Special Carriage Charge" the times given are subject to a 30 minute grace period (therefore 10:30 deliveries have up to 11am to be delivered) and work off a next working day basis. Please make sure that if a timed carriage option is selected that someone is available to sign for the consignment as without this it will be subject to being returned to the delivery depot for a redelivery 1-2 days later.

N.B - Deliveries requested for Pre 9.30am are subject to being delivered as early at 7am.

N.B - All orders processed after 4pm, weekends or Bank Holidays are subjected to being processed the following working day

Returns Policy

An RMA request must be completed online at http://hawco.returnsportal.net/

If approved, an automated RMA email will be sent. This will reference a unique RMA number. The automated RMA approval email will prompt you to log into the online returns system and print off the RMA packing slip, which is to be affixed to the outside of the packaging.

N.B. Returns will not be accepted without a returns authorisation number (RMA) and will be returned at the sender’s expense.

When you have your returns authorisation number (RMA), please ensure you send the return to our Logistics Centre:

Hawco Logistics Centre,
8 Cranfield Road,
Lostock Industrial Estate,
Lostock,
Bolton, UK
BL6 4SB

N.B. - Any returns sent to the Hawco Head Office in Godalming and not the Logistics Centre address in Bolton will be refused. This may cause excessive delay in handling the return, or possible loss if your carrier mislays the delivery. Hawco cannot accept any liability for items which are not correctly addressed or packaged for return.

Credit or replacement product will only be issued on receipt and Hawco’s acceptance of faulty or damaged items. Items that are returned which are subsequently determined to have been damaged by the customer and or by their agent may be subject to an investigation and admin fee. In all instances any logistical costs incurred by Hawco during this process will be chargeable.

Item(s) must be returned within 7 days of the issue of the returns number. If not returned by this date then no credit will be given.

Items ordered incorrectly or that are surplus to requirements may be subject to a 20% restocking charge and will only be accepted within the first 3 months of sale and are still in the original packaging. Items ordered in specifically may be refused entirely.

N.B. No credit will be issued to any surplus items that are received damaged.

The customer has a 3 day window to report items that have been received damaged, failure to do so will result in your returns claim being rejected.

All deliveries and returns are subject to our standard Terms & Conditions of sale. - See more at: http://hawco.returnsportal.net/ReturnPolicy/

Please Note - In some cases the alternatives might be under or over powered or dimensionally different, if you are unsure we recommend calling the office on 01483 869100