LU-VE Low Profile Unit Cooler 1040W @ 10KTD R404a, Off Cycle Defrost, 1 x 230mm Dia Fan

Product Code: SHS-15
£153.15

In Stock


Specification

RATED 1040W 10'CTD. SINGLE FAN 240V

Image is for display purpose only



rated 1040w 10'ctd. single fan 240v off cycle defrost.

Dimensional and functional characteristics:

  • Super efficient heat exchanger
  • Reduced dehumidification
  • Reduced frost formation
  • Increased air throw
  • Greatly reduced internal volume
  • Low noise levels
  • Low energy consumption
  • Very compact overall dimensions.

New Turbocoil 2 Heat Exchanger

Our super efficient Turbocoil 2 heat exchanger has a high ratio of capacity/cost, that has been achieved by the following: Tubes New small diameter inner grooved helical, high efficiency copper tubes specially developed for the new refrigerants.

Turbofin 2

New aluminium high efficiency fins with special turbulence, reducing dehumidification and frost formation.

Fan motors

Fan motors are manufactured according to CEI VDE Standards, Insulation Class B. All motors are single phase, thermally protected against overload and can be used on 230V/50Hz supplies.

Fan guard

Special attention has been given to the air flow path to provide uniform and aerodynamic air flow through the coil. All fan guards conform to the most severe European Safety Standards, thus guaranteeing maximum protection.

Electric Defrost

The stainless steel electric heater element permits a quick and efficient defrost of the coil.

Cabinet construction

The main framework of the unit cooler is constructed in aluminium, and stainless steel screws are used throughout. The shroud is manufactured in a white reinforced material which is suitable for use in low temperature coldrooms.

Test

All coils are degreased, cleaned and tested to 30 bar test pressure.

Maintenance

The casing is easily removable to give all round accesibility and to make installation, cleaning or service much easier than traditional unit coolers.

Design standard

The products are provided for incorporation in machines as defined in the EC Machine Directive 89/392/EEC and subsequent modifications according to the following safety standard references: – EN 60/335-1 (CEI 61-50) Safety of household and similar electrical appliances. General requirements. – CEI-EN 60/335-2-40 Safety of household and similar electrical appliances - Part 2: Particular requirements for electrical heat pumps, air conditioners and dehumidifiers. – Machine Directive 89/336 EEC and subsequent modifications. Electromagnetic compatibility - Directive 73/23 EEC Low tension. – EN 294 Fan guards.

Quality Assurance

Quality Assurance Qualification, covering Development, Testing, Production method and Inspection procedures.



Please Note: For all Export orders a member of our team will contact you to arrange shipping

Please Note - In some cases the alternatives might be under or over powered or dimensionally different, if you are unsure we recommend calling the office on 01483 869100
rated 1040w 10'ctd. single fan 240v off cycle defrost.

Dimensional and functional characteristics:

  • Super efficient heat exchanger
  • Reduced dehumidification
  • Reduced frost formation
  • Increased air throw
  • Greatly reduced internal volume
  • Low noise levels
  • Low energy consumption
  • Very compact overall dimensions.

New Turbocoil 2 Heat Exchanger

Our super efficient Turbocoil 2 heat exchanger has a high ratio of capacity/cost, that has been achieved by the following: Tubes New small diameter inner grooved helical, high efficiency copper tubes specially developed for the new refrigerants.

Turbofin 2

New aluminium high efficiency fins with special turbulence, reducing dehumidification and frost formation.

Fan motors

Fan motors are manufactured according to CEI VDE Standards, Insulation Class B. All motors are single phase, thermally protected against overload and can be used on 230V/50Hz supplies.

Fan guard

Special attention has been given to the air flow path to provide uniform and aerodynamic air flow through the coil. All fan guards conform to the most severe European Safety Standards, thus guaranteeing maximum protection.

Electric Defrost

The stainless steel electric heater element permits a quick and efficient defrost of the coil.

Cabinet construction

The main framework of the unit cooler is constructed in aluminium, and stainless steel screws are used throughout. The shroud is manufactured in a white reinforced material which is suitable for use in low temperature coldrooms.

Test

All coils are degreased, cleaned and tested to 30 bar test pressure.

Maintenance

The casing is easily removable to give all round accesibility and to make installation, cleaning or service much easier than traditional unit coolers.

Design standard

The products are provided for incorporation in machines as defined in the EC Machine Directive 89/392/EEC and subsequent modifications according to the following safety standard references: – EN 60/335-1 (CEI 61-50) Safety of household and similar electrical appliances. General requirements. – CEI-EN 60/335-2-40 Safety of household and similar electrical appliances - Part 2: Particular requirements for electrical heat pumps, air conditioners and dehumidifiers. – Machine Directive 89/336 EEC and subsequent modifications. Electromagnetic compatibility - Directive 73/23 EEC Low tension. – EN 294 Fan guards.

Quality Assurance

Quality Assurance Qualification, covering Development, Testing, Production method and Inspection procedures.



Please Note: For all Export orders a member of our team will contact you to arrange shipping

Delivery & Returns

Delivery Policy

For Quick Pick and website items only, delivery is free of charge for orders over £50.00. For Quick Pick and website orders below £50.00, a £15.00 delivery and administration fee will be charged.

Hawco offers a next day delivery service for orders placed before 4pm Monday - Friday. The delivery service is standard to all central UK. If you require overseas or timed delivery, please call the sales office on Hawco: 01483 869070

Special Carriage Costs

When ordering online and chosing a "Special Carriage Charge" the times given are subject to a 30 minute grace period (therefore 10:30 deliveries have up to 11am to be delivered) and work off a next working day basis. Please make sure that if a timed carriage option is selected that someone is available to sign for the consignment as without this it will be subject to being returned to the delivery depot for a redelivery 1-2 days later.

N.B - Deliveries requested for Pre 9.30am are subject to being delivered as early at 7am.

N.B - All orders processed after 4pm, weekends or Bank Holidays are subjected to being processed the following working day

Returns Policy

An RMA request must be completed online at http://hawco.returnsportal.net/

If approved, an automated RMA email will be sent. This will reference a unique RMA number. The automated RMA approval email will prompt you to log into the online returns system and print off the RMA packing slip, which is to be affixed to the outside of the packaging.

N.B. Returns will not be accepted without a returns authorisation number (RMA) and will be returned at the sender’s expense.

When you have your returns authorisation number (RMA), please ensure you send the return to our Logistics Centre:

Hawco Logistics Centre,
8 Cranfield Road,
Lostock Industrial Estate,
Lostock,
Bolton, UK
BL6 4SB

N.B. - Any returns sent to the Hawco Head Office in Godalming and not the Logistics Centre address in Bolton will be refused. This may cause excessive delay in handling the return, or possible loss if your carrier mislays the delivery. Hawco cannot accept any liability for items which are not correctly addressed or packaged for return.

Credit or replacement product will only be issued on receipt and Hawco’s acceptance of faulty or damaged items. Items that are returned which are subsequently determined to have been damaged by the customer and or by their agent may be subject to an investigation and admin fee. In all instances any logistical costs incurred by Hawco during this process will be chargeable.

Item(s) must be returned within 7 days of the issue of the returns number. If not returned by this date then no credit will be given.

Items ordered incorrectly or that are surplus to requirements may be subject to a 20% restocking charge and will only be accepted within the first 3 months of sale and are still in the original packaging. Items ordered in specifically may be refused entirely.

N.B. No credit will be issued to any surplus items that are received damaged.

The customer has a 3 day window to report items that have been received damaged, failure to do so will result in your returns claim being rejected.

All deliveries and returns are subject to our standard Terms & Conditions of sale. - See more at: http://hawco.returnsportal.net/ReturnPolicy/

Please Note - In some cases the alternatives might be under or over powered or dimensionally different, if you are unsure we recommend calling the office on 01483 869100