CAREL Easy Range

  • Easy Cool & Easy Freeze digital controllers from CAREL
  • Pre-Programmed
  • Plug and Play
  • Easy to install
  • Perfect for any refrigerated plug-in showcase, display case or cabinet
  • NTC probes included
  • IP65 protection

Image is for display purpose only
Model Number Power Supply Input Type Number of Relays Price Qty
EASY COOL 230v NTC (10k) Out: 1
£25.00
EASY FREEZE 230v 2x NTC (10k) Out: 2
£34.91


Easy Cool


CAREL Easy Cool controller is suitable for static plug-in refrigeration applications at normal temperature (above 0 °C)


  • Relay: Compressor 16A

  • Includes 1 x NTC 1.5m room temperature probe


  • Thermostat with a preloaded set point (+3 °C) and defrost by stopping the compressor.

  • Controller can be fully programmed using just 19 parameters.

  • Parameters accessible on entering the password are control; compressor protection; defrost and alarms.

  • Other pre-programmed settings: Differential; 2°C, Defrost; Off Cycle, 20mins every 6 hours

  • -50/+90, 230v 50/60hz




Easy Freeze


CAREL Easy Freeze controller is suitable for ventilated plug-in refrigeration applications at low temperature (below 0 °C) including forced air coolers, chillers, freezer rooms and cabinets


  • Relay: Compressor 16A; Defrost 8A; Evaporator fans 8A

  • Includes 2 x NTC 1.5m room and defrost temperature probes


  • Temperature controller with a preloaded set point (-18 °C), defrost by temperature and evaporator fan management.

  • Controller can be fully programmed using just 27 parameters.

  • Parameters accessible on entering the password are control; compressor protection; defrost; evaporator fan management and alarms.

  • Other pre-programmed settings: Differential; 2°C, Defrost; Electric, 25mins every 6 hours.

  • For forced air chillers, simply adjust Easy Freeze set point to desired temperature.

  • -50/+90, 230v 50/60Hz




Please Note: For all Export orders a member of our team will contact you to arrange shipping

Please Note - In some cases the alternatives might be under or over powered or dimensionally different, if you are unsure we recommend calling the office on 01483 869100

Easy Cool


CAREL Easy Cool controller is suitable for static plug-in refrigeration applications at normal temperature (above 0 °C)


  • Relay: Compressor 16A

  • Includes 1 x NTC 1.5m room temperature probe


  • Thermostat with a preloaded set point (+3 °C) and defrost by stopping the compressor.

  • Controller can be fully programmed using just 19 parameters.

  • Parameters accessible on entering the password are control; compressor protection; defrost and alarms.

  • Other pre-programmed settings: Differential; 2°C, Defrost; Off Cycle, 20mins every 6 hours

  • -50/+90, 230v 50/60hz




Easy Freeze


CAREL Easy Freeze controller is suitable for ventilated plug-in refrigeration applications at low temperature (below 0 °C) including forced air coolers, chillers, freezer rooms and cabinets


  • Relay: Compressor 16A; Defrost 8A; Evaporator fans 8A

  • Includes 2 x NTC 1.5m room and defrost temperature probes


  • Temperature controller with a preloaded set point (-18 °C), defrost by temperature and evaporator fan management.

  • Controller can be fully programmed using just 27 parameters.

  • Parameters accessible on entering the password are control; compressor protection; defrost; evaporator fan management and alarms.

  • Other pre-programmed settings: Differential; 2°C, Defrost; Electric, 25mins every 6 hours.

  • For forced air chillers, simply adjust Easy Freeze set point to desired temperature.

  • -50/+90, 230v 50/60Hz




Please Note: For all Export orders a member of our team will contact you to arrange shipping

Please Note - In some cases the alternatives might be under or over powered or dimensionally different, if you are unsure we recommend calling the office on 01483 869100