HEAT PUMP & HVAC MANUFACTURING
We Supply Components That OEMs Trust For The Design of Heat Pumps and Other Heating Systems
Systems that are built for heating and hot water need to be reliable. We help manufacturers find specialist components that not only work effectively and efficiently but are made to the highest standards.
For heat pumps, the specification of the right inverter-driven scroll compressor and heat exchanger is crucial in achieving the required performance and reliability. By contrast, radiant heating or duct heating often requires customised heating elements to improve heat transfer to the surrounding air flow. We assist with the selection of the right components for each application - at a quality that will be designed to last.
We can also advise on the crucial specification of safety cutouts to make sure that these operate effectively to provide overheat protection. Given their importance, every thermostat is rigorously tested and complies with international certification.
For heat pumps, the specification of the right inverter-driven scroll compressor and heat exchanger is crucial in achieving the required performance and reliability. By contrast, radiant heating or duct heating often requires customised heating elements to improve heat transfer to the surrounding air flow. We assist with the selection of the right components for each application - at a quality that will be designed to last.
We can also advise on the crucial specification of safety cutouts to make sure that these operate effectively to provide overheat protection. Given their importance, every thermostat is rigorously tested and complies with international certification.
Some of the Ways We Can Help
Assistance with Heat Pump Design
We work with heat pump manufacturers in the UK and Europe, helping them to deliver greater product efficiency. Our support begins with initial prototyping and continues through testing into production.
Our recommendations start with the choice of inverter-driven compressors and heat exchangers to achieve the required duty. A number of available options provides design flexibility.
With access to an extensive portfolio of specialist cooling components, including valves, line components and safety cutouts, we can help complete every aspect of a system design.
Our recommendations start with the choice of inverter-driven compressors and heat exchangers to achieve the required duty. A number of available options provides design flexibility.
With access to an extensive portfolio of specialist cooling components, including valves, line components and safety cutouts, we can help complete every aspect of a system design.
Adapting Heating Elements to Suit Each Application
Heating elements we supply for heating and ventilation applications, such as duct heaters, are often customised to optimise heat transfer to the surrounding air flow.
After selecting the appropriate power rating, the most common design changes are made to the size and shape of the element. We can also consider how quickly the element heats up, its level of energy efficiency and whether any special materials are required.
After selecting the appropriate power rating, the most common design changes are made to the size and shape of the element. We can also consider how quickly the element heats up, its level of energy efficiency and whether any special materials are required.
Ensuring Effective Monitoring and Control
We help manufacturers to choose the right component to monitor and control temperature ranges, air flows or the flame in a gas burner.
These components ensure the safe and reliable operation of many heating products, from gas-fired domestic boilers to electric duct heaters. The options available span simple analogue devices or thermostats through to advanced programmable digital controllers.
These components ensure the safe and reliable operation of many heating products, from gas-fired domestic boilers to electric duct heaters. The options available span simple analogue devices or thermostats through to advanced programmable digital controllers.
Key Heat Pump Components
HEAT PUMPS
Compressors
HEAT PUMPS
Inverter Drives
Inverter Drives
HEAT PUMPS
Heat Exchangers
HEAT PUMPS
EEVs & Other Valves
Other Components Used for Commercial Heating
Straight Rod Heater Elements
FOR DUCT HEATING
FOR DUCT HEATING
Tubular Elements
FOR DUCT HEATING
FOR DUCT HEATING
Finned Heaters
FOR DUCT HEATING
FOR DUCT HEATING
PTC Heater Element
FOR DUCT HEATERS
FOR DUCT HEATERS
Manufacturers We Support with their Commercial Heating Products
Bespoke Heater Mats for Radiant Heating
We’ve supplied thousands of custom-made heater mats for use in electric radiant heater panels.
These wall and ceiling panels are a flexible way to heat buildings, such as churches, schools, leisure centres, libraries and art galleries.
The customised heater mats are supplied with a self-adhesive backing for bonding to the aluminium panels. Typically an integrated 110°C bimetallic snap disc thermostat is also supplied.
These wall and ceiling panels are a flexible way to heat buildings, such as churches, schools, leisure centres, libraries and art galleries.
The customised heater mats are supplied with a self-adhesive backing for bonding to the aluminium panels. Typically an integrated 110°C bimetallic snap disc thermostat is also supplied.
Snap Disc Thermostats for Boiler OEMs
Over the past decade, we’ve supplied over 600,000 thermal cutouts to UK domestic boiler manufacturers.
Manufactured and certified to global standards by NGT in Japan, these activate when the water pipe temperature exceeds 100°C, providing an essential safety measure.
The thermostat’s curved surface increases the surface area, ensuring a good contact against the pipe and improving heat transfer for greater accuracy.
Manufactured and certified to global standards by NGT in Japan, these activate when the water pipe temperature exceeds 100°C, providing an essential safety measure.
The thermostat’s curved surface increases the surface area, ensuring a good contact against the pipe and improving heat transfer for greater accuracy.
R290 Scroll Compressors for Polish Heat Pumps
We've supplied five different scroll compressor models up to 21kW to a major air source heat pump manufacturer in Poland.
The vertical, inverter-driven compressors were integrated into a popular monobloc heat pump, which delivers an impressively high efficiency of 5.5 COP.
The vertical, inverter-driven compressors were integrated into a popular monobloc heat pump, which delivers an impressively high efficiency of 5.5 COP.
Supporting Ground Source Heat Pumps
Based in Truro, Kensa is the UK’s only manufacturer of ground source heat pumps.
We supply over 1000 Sanhua check valves a year to Kensa, which control the unidirectional flow of the refrigerant through the system and prevent backflow.
These are used in the company's R134A heat pump range (3kW and 6kW) and their R407C (7 to 17kW) models designed for large and commercial buildings.
We supply over 1000 Sanhua check valves a year to Kensa, which control the unidirectional flow of the refrigerant through the system and prevent backflow.
These are used in the company's R134A heat pump range (3kW and 6kW) and their R407C (7 to 17kW) models designed for large and commercial buildings.
Renewable Hot Water Cylinders
We support Green Grid Innovations, UK with the production of low power domestic hot water cylinders, a highly efficient alternative to traditional electric powered immersion cylinders.
A series of 24v 130w silicone rubber heater mats are provided which are wrapped around the cylinder and fixed into place using a self-adhesive backing. These are supplied with a bimetallic thermostat and K-type thermocouple.
A series of 24v 130w silicone rubber heater mats are provided which are wrapped around the cylinder and fixed into place using a self-adhesive backing. These are supplied with a bimetallic thermostat and K-type thermocouple.
Heater Elements for Underground Trains
We supply two types of robust and reliable heating elements to AmTecs Ltd for integration into trench heaters used in train carriages on the London Underground.
Related Literature
Here to support you
Our sales director Chris Hodges can advise on the selection of heat pump components.
Chris has 20 years experience with the specification of commercial refrigeration components, including heat pumps.
If you have requirements for a customised component for a commercial heating application, contact us.
Call +44 (0)1483 869 070 or email sales@hawco.co.uk
HEAT PUMP & HVAC MANUFACTURING
We Supply Components That OEMs Trust For The Design of Heat Pumps and Other Heating Systems
Systems that are built for heating and hot water need to be reliable. We help manufacturers find specialist components that not only work effectively and efficiently but are made to the highest standards.
For heat pumps, the specification of the right inverter-driven scroll compressor and heat exchanger is crucial in achieving the required performance and reliability. By contrast, radiant heating or duct heating often requires customised heating elements to improve heat transfer to the surrounding air flow. We assist with the selection of the right components for each application - at a quality that will be designed to last.
We can also advise on the crucial specification of safety cutouts to make sure that these operate effectively to provide overheat protection. Given their importance, every thermostat is rigorously tested and complies with international certification.
For heat pumps, the specification of the right inverter-driven scroll compressor and heat exchanger is crucial in achieving the required performance and reliability. By contrast, radiant heating or duct heating often requires customised heating elements to improve heat transfer to the surrounding air flow. We assist with the selection of the right components for each application - at a quality that will be designed to last.
We can also advise on the crucial specification of safety cutouts to make sure that these operate effectively to provide overheat protection. Given their importance, every thermostat is rigorously tested and complies with international certification.
Some of the Ways We Can Help
Assistance with Heat Pump Design
We work with heat pump manufacturers in the UK and Europe, helping them to deliver greater product efficiency. Our support begins with initial prototyping and continues through testing into production.
Our recommendations start with the choice of inverter-driven compressors and heat exchangers to achieve the required duty. A number of available options provides design flexibility.
With access to an extensive portfolio of specialist cooling components, including valves, line components and safety cutouts, we can help complete every aspect of a system design.
Our recommendations start with the choice of inverter-driven compressors and heat exchangers to achieve the required duty. A number of available options provides design flexibility.
With access to an extensive portfolio of specialist cooling components, including valves, line components and safety cutouts, we can help complete every aspect of a system design.
Adapting Heating Elements to Suit Each Application
Heating elements we supply for heating and ventilation applications, such as duct heaters, are often customised to optimise heat transfer to the surrounding air flow.
After selecting the appropriate power rating, the most common design changes are made to the size and shape of the element. We can also consider how quickly the element heats up, its level of energy efficiency and whether any special materials are required.
After selecting the appropriate power rating, the most common design changes are made to the size and shape of the element. We can also consider how quickly the element heats up, its level of energy efficiency and whether any special materials are required.
Ensuring Effective Monitoring and Control
We help manufacturers to choose the right component to monitor and control temperature ranges, air flows or the flame in a gas burner.
These components ensure the safe and reliable operation of many heating products, from gas-fired domestic boilers to electric duct heaters. The options available span simple analogue devices or thermostats through to advanced programmable digital controllers.
These components ensure the safe and reliable operation of many heating products, from gas-fired domestic boilers to electric duct heaters. The options available span simple analogue devices or thermostats through to advanced programmable digital controllers.
Key Heat Pump Components
HEAT PUMPS
Compressors
HEAT PUMPS
Inverter Drives
Inverter Drives
HEAT PUMPS
Heat Exchangers
HEAT PUMPS
EEVs & Other Valves
Other Components Used for Commercial Heating
Straight Rod Heater Elements
FOR DUCT HEATING
FOR DUCT HEATING
Tubular Elements
FOR DUCT HEATING
FOR DUCT HEATING
Finned Heaters
FOR DUCT HEATING
FOR DUCT HEATING
PTC Heater Element
FOR DUCT HEATERS
FOR DUCT HEATERS
Manufacturers We Support with their Commercial Heating Products
Bespoke Heater Mats for Radiant Heating
We’ve supplied thousands of custom-made heater mats for use in electric radiant heater panels.
These wall and ceiling panels are a flexible way to heat buildings, such as churches, schools, leisure centres, libraries and art galleries.
The customised heater mats are supplied with a self-adhesive backing for bonding to the aluminium panels. Typically an integrated 110°C bimetallic snap disc thermostat is also supplied.
These wall and ceiling panels are a flexible way to heat buildings, such as churches, schools, leisure centres, libraries and art galleries.
The customised heater mats are supplied with a self-adhesive backing for bonding to the aluminium panels. Typically an integrated 110°C bimetallic snap disc thermostat is also supplied.
Snap Disc Thermostats for Boiler OEMs
Over the past decade, we’ve supplied over 600,000 thermal cutouts to UK domestic boiler manufacturers.
Manufactured and certified to global standards by NGT in Japan, these activate when the water pipe temperature exceeds 100°C, providing an essential safety measure.
The thermostat’s curved surface increases the surface area, ensuring a good contact against the pipe and improving heat transfer for greater accuracy.
Manufactured and certified to global standards by NGT in Japan, these activate when the water pipe temperature exceeds 100°C, providing an essential safety measure.
The thermostat’s curved surface increases the surface area, ensuring a good contact against the pipe and improving heat transfer for greater accuracy.
R290 Scroll Compressors for Polish Heat Pumps
We've supplied five different scroll compressor models up to 21kW to a major air source heat pump manufacturer in Poland.
The vertical, inverter-driven compressors were integrated into a popular monobloc heat pump, which delivers an impressively high efficiency of 5.5 COP.
The vertical, inverter-driven compressors were integrated into a popular monobloc heat pump, which delivers an impressively high efficiency of 5.5 COP.
Supporting Ground Source Heat Pumps
Based in Truro, Kensa is the UK’s only manufacturer of ground source heat pumps.
We supply over 1000 Sanhua check valves a year to Kensa, which control the unidirectional flow of the refrigerant through the system and prevent backflow.
These are used in the company's R134A heat pump range (3kW and 6kW) and their R407C (7 to 17kW) models designed for large and commercial buildings.
We supply over 1000 Sanhua check valves a year to Kensa, which control the unidirectional flow of the refrigerant through the system and prevent backflow.
These are used in the company's R134A heat pump range (3kW and 6kW) and their R407C (7 to 17kW) models designed for large and commercial buildings.
Renewable Hot Water Cylinders
We support Green Grid Innovations, UK with the production of low power domestic hot water cylinders, a highly efficient alternative to traditional electric powered immersion cylinders.
A series of 24v 130w silicone rubber heater mats are provided which are wrapped around the cylinder and fixed into place using a self-adhesive backing. These are supplied with a snapdisc thermostat and K-type thermocouple.
A series of 24v 130w silicone rubber heater mats are provided which are wrapped around the cylinder and fixed into place using a self-adhesive backing. These are supplied with a snapdisc thermostat and K-type thermocouple.
Heater Elements for Underground Trains
We supply two types of robust and reliable heating elements to AmTecs Ltd for integration into trench heaters used in train carriages on the London Underground.
Related Literature
Here to support you
Our sales director Chris Hodges can advise on the selection of heat pump components.
Chris has 20 years experience with the specification of commercial refrigeration components, including heat pumps.
If you have requirements for a customised component for a commercial heating application, contact us.
Call +44 (0)1483 869 070 or email sales@hawco.co.uk