Hawco Group, a focused technical solutions distributor, specialising
in refrigeration, air conditioning, thermal management and electrical
process control products.

Advanced search

limitor

P-Type

Limitor P82 Auto reset thermal overload, Open at 80°C with normally closed contacts (open on rise)

Type P Datasheet

'Z' Mounting Clip Datasheet

Area of Application The temperature detector P is used wherever protection against overtemperatures is required. Specific applications include: protection of primary windings in transformers, winding protection in small electric motors and general temperature protection of small electric equipments.

Function

The temperature detector P operates independent from any current supply. Temperature detection is effected by means of a bimetal disk which was first dimensioned in accordance with the required cut-off temperature TA. When this fixed cut-off temperature TA is reached, this bimetal disk will snaps over, breaking a contact system and thereby interrupting the electric circuit of the device to be protected. After cooling down and reaching the cut-in temperature TE, the bimetal disk will automatically return into its original position and thus re-make the contact. The electric circuit is closed again.

Buy online via the links below;

311-713, Limitor P82 Auto reset thermal overload, Open at 70°C

311-714, Limitor P82 Auto reset thermal overload, Open at 80°C

311-715, Limitor P82 Auto reset thermal overload, Open at 90°C

311-716, Limitor P82 Auto reset thermal overload, Open at 100°C

311-717, Limitor P82 Auto reset thermal overload, Open at 105°C

311-718, Limitor P82 Auto reset thermal overload, Open at 110°C

311-719, Limitor P82 Auto reset thermal overload, Open at 120°C

311-720, Limitor P82 Auto reset thermal overload, Open at 125°C

311-721, Limitor P82 Auto reset thermal overload, Open at 130°C

311-722, Limitor P82 Auto reset thermal overload, Open at 140°C

311-729, Mounting clip